Manual Lift Lightning Rod Description
The overall appearance of the manual lift lightning rod is military green. When it rises, the maximum extension height is the customized height. The position of the hand crank is at the first section of the telescopic mast. The hand crank is 0.5 meters away from the telescopic mast. There is an external guy wire, which cannot be forcibly pulled or cut. The telescopic mast is lifted and lowered by two external guy wires pulled up and down between each section. At the top of each section, there is an external fixed buckle used to connect the 3-layer guy wires. Through three 3-layer wires and three ground pegs, a total of 9 guy wires form a fixed device to fix the lightning rod.
Manual Lift Lightning Rod Technical Parameter
| Extended height | 30 meters customizable |
| Outer tube diameter | Customizable |
| Material | Aluminum magnesium alloy / carbon fibre / fibreglass |
| Drive mode | Manual |
| Color | Customizable |
| Closed height | Customizable |
| Innertube diameter | Customizable |
| Maximum load description | 5KG |
| Wind resistance level | Level 8 |
| Protection level | lp64 |
Manual Lift Lightning Rod Operation
The manual lift lightning rod requires manual operation. One person sets the lightning rod in a certain position, and then the three guy wires are fixedly linked to the buckle at the top of the lightning rod, then slowly raises the lightning rod, and slowly releases the guy wires. Raise the lightning rod to the highest position, and according to the surrounding environment and the position of the lightning rod, within a range of 2-3 meters, hit three ground pegs, then tighten the guy wire, fix the ring on the lightning rod with the guy wire buckle, and connect the guy wire to the ground peg. After both sides a re fixed, observe the stability of the lightning rod and make slight ad」ustments. It includes three ground pegs, three wires, and a lifting hand crank. During the lifting process, shake it evenly and lift it to the top without excessive force to prevent strong twisting and breaking of the guy wire.
Manual Lift Lightning Rod Specifications
| Type | Retracted Height(M) | Raised Height(M) | Diameter(mm) | Weight of Hand Crank(kg) | Weight of Motorized(kg) | |||
| Min | Max | Al.Alloy | Carbon Fiber | Al.Alloy | Carbon Fiber | |||
| HDFL-5S | 1.6 | 5 | 50 | 80 | 23 | 18 | 35 | 30 |
| HDFL-6S | 1.6 | 6 | 60 | 105 | 24 | 20 | 38 | 34 |
| HDFL-8S | 2.2 | 8 | 60 | 105 | 26 | 22 | 45 | 41 |
| HDFL-10S | 2.2 | 10 | 50 | 105 | 28 | 24 | 55 | 50 |
| HDFL-12S | 2.25 | 12 | 40 | 105 | 30 | 30 | 62 | 56 |
| HDFL-14S | 2.3 | 14 | 40 | 120 | 42 | 40 | 75 | 67 |
| HDFL-15S | 2.4 | 15 | 40 | 140 | 47 | 44 | 80 | 71 |
| HDFL-16S | 2.45 | 16 | 40 | 160 | 51 | 47 | 84 | 74 |
| HDFL-18S | 2.7 | 18 | 50 | 160 | 54 | 49 | 90 | 79 |
| HDFL-20S | 2.7 | 20 | 40 | 160 | 57 | 52 | 96 | 84 |
| HDFL-30S | 2.9 | 30 | 40 | 220 | 130 | 125 | 220 | 210 |